Quick and simple-to-use dual-channel testing system for building acoustics measurements by wireless communication between tablet in the operator’s hands and the measuring instruments in both the source and receiving rooms.
Normally, building acoustics testing in the field requires putting out a long noise generator cable between the test rooms. For dual channel measurements, long microphone extension cables must be laid out as well. This procedure is time consuming, particularly when the cables are to be laid out of windows in one room and into another window in the other room, Or, in cases where the cables have to go through corridors, down the staircase, and into a new corridor on another floor!
The Bluetooth Wireless Building Acoustics System is designed to avoid these cumbersome procedures. In addition, it limits the wear and tear problems often found on these cables when used over a period of time.
The System requires one measurement unit in each of the test rooms, plus a loudspeaker for noise excitation, and a control unit placed with operator in a third room. With these units, any airborne or impact sound insulation test may be performed including the measurements of reverberation times and the final calculation of the sound insulation indeeces (Rw, STC, Ln,w, etc.).
- No cables between source-, receiving– and control-rooms
- Elimination of long unwieldy microphone extension cables
- Elimination of cable wear due to transportation and through-door or -window
- Great time savings for sound insulation tests due to easy set-up and tear-down